Carrying out Environmental Impact Assessment (EIA) is an essential component of most developmental and industrial activities in any country. This has been adopted to ensure that development and environment protection go hand-in-hand. To achieve this objective, it is crucial that quality of EIAs being carried out is of a high order so that possible impacts on environment of such activities can be assessed and mitigative measures adopted. However, the present situation is far from satisfactory, since the EIAs being developed, more often than not, do not measure up to the required quality.
Our Highly competent EIA Coordinators have broad knowledge about your project, as well as the above functional areas so that we are able to correlate the process, production capacity and baseline environmental survey against the Environmental Impacts.
A waste audit is where the waste a business, organisation or individual produces is systematically measured. An audit can involve assessing things about your waste stream like:
The types of materials in the waste stream
If you have decided you want to try to reduce waste, there are a couple of basic questions you first need to ask:
A waste audit is a process that will help you answer these questions. It will provide some hard numbers for you to plan and measure your progress. Also if you want to sell the waste reduction initiatives you are planning, there is nothing like being able to show hard numbers and graphs that demonstrate exactly what you can reduce and by how much. It can sometimes be tempting to go ahead and start putting in ideas to reduce waste, but a bit of time and effort taken at the start will pay in the long run.
Environmental degradation is a serious issue threatening the mankind we offers various solutions at this junction to make a serious effort towards sustainable development; we offers varied solutions at this Juncture. Increased awareness has led to environmentally committed and credible companies to offset their competitive edge in national and International markets
Aid the design of cost-effective monitoring programs (where, when and how to measure); Process and interpret the results of programs; Make results available in a way that allows managers to easily assess alternative strategies and predict likely outcomes.
Hawkseye can provide a wide range of environmental monitoring services for clients whose activities impact upon natural systems or have the potential to pollute the environment. Often the objectives of these services are to verify whether environmental emissions are in compliance with Presidency of Metrology and Environment (PME) regulations and verify that health and safety standards are not exceeded. Our monitoring services include:
It has two state-of-the-art ambient air monitoring stations, these stations can monitor various air pollutants, including (i) Carbon Monoxide, (ii) Sulphur Dioxide, (iii) Oxides of Nitrogen, (iv) VOC’s, (v) Ozone, (vi) Particulate Matters (PM10 & PM2.5) and Metrological Parameters like Wind Direction, Temperature, Relative Humidity and Solar Radiation.
Indoor air quality has major influences on the health, comfort and well-being of building occupants, Poor air quality has been linked to Sick Building Syndrome, reduced productivity in offices and impaired learning schools. Indoor air quality equipment can monitor the various issues with the indoor Air.
Our expertise allows us to provide practical advice on noise and vibration in a board range of projects. These range from sound insulation testing in residential developments to noise surveys and noise impact assessment for planning purposes, national health or even major energy projects.
Consultancy on waste water treatment helps the organisation to minimize the waste generation, make compliance to local legislation and to ensure zero discharge.
Hawkseye offers a wide range of technical and consultancy solutions for wastewater treatment applications. A global network of technical experts helps clients achieve wastewater related efficiency, compliance and sustainable business success in highly regulated industries. To determine optimal solutions for wastewater treatment applications, We offers analysis of each specific situation. If data is missing or cannot be calculated, we measure key parameters or guide analytical work as necessary.
Hawkseye conducts treatability studies, laboratory testing and pilot testing both in-house and at the customer's site; develop environmental and health management systems; and aids in the implementation of IPPC (Integrated Pollution Prevention Control) conditions.
To determine the optimal solution for wastewater treatment applications, Hawkseye starts with a thorough analysis of the specific situation. If data is missing or cannot be calculated, we measure key parameters, or guide analytical work, as necessary.
Aid the design of cost-effective monitoring programs (where, when and how to measure); Process and interpret the results of programs; Make results available in a way that allows managers to easily assess alternative strategies and predict likely outcomes. Hawkseye can provide a wide range of environmental monitoring services for clients whose activities impact upon natural systems or have the potential to pollute the environment. Often the objectives of these services are to verify whether environmental emissions are in compliance with Presidency of Metrology and Environment (PME) regulations and verify that health and safety standards are not exceeded.
As an internationally active enterprise with subsidaries in different countries you face the challenge to deal with a number of different legislations. Your have a supply chain integrating also your suppliers. You want to minimize the risk of failure of your internal and external supply chain and reduce the risk of reputational issues. It is important for you to apply uniforn global EHS standards and policies for your own sites and your suppliers. In order to verify the compliance to national regulations and company policies EHS auditing is the common practice in the industry.
EHS auditing is the accepted tool in the industry to fulfill these demands. We help you to develop and maintain an EHS audit system tailor made to your company’s requirements. We support your auditors during and after the assessment as co- or lead-auditors or we perform audits on your behalf as independent auditors.
The Audit process helps organizations to enforce EHS procedures, like documentation and management of environmental, health and safety requirements through corrective actions and closed loop follow-up processes. Auditing provides the necessary controls to support a company’s ongoing monitoring process and reduce risk of safety and environmental hazard. With an EHS Audit system and a diligent implementation of corrective actions you can reduce the exposure of your company to investigations and liabilities.
Environment is an all-embracing multi-disciplinary topic and requires knowledge of a wide range of subjects: law and compliance, risk/safety management, occupational health and hygiene, ergonomics and human factors. The volume of environment legislation has increased rapidly because of national legislation, the social dimension , and case law. Many areas that were considered relatively straightforward have become increasingly complex and more detailed, i.e. Construction.
An organisation needs to take environment legislation beyond mere compliance. To add real value they should be capable of anticipating and evaluating proposed changes in the law, so that the organisation can plan, prepare and implement sound policies. Hawkseye can advise clients about the implications of existing and impending legislation on resources and business objectives.
Our focus is on providing clients with specialised legal support, backed by a legal team with significant experience in the areas mentioned above. The staff represents a multi-disciplined team of lawyers, safety professionals and project managers
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour
SOL Safety Group is a globally accredited safety training, consultancy Inspection and Certification group aiming to improve the quality of the workplace, the working professionals and the contributions they make to their organizations.
M-11 Dar Al Rigga,
Al Muraqqabat Deira,
Dubai UAE
training@solsafetygroup.com sol.savingourlives@gmail.com
